custom lanyard
Custom lanyard for your events
Your brand at eye level — on every badge at your event.
The custom lanyard — or neck strap — is the essential accessory for your trade shows, conferences and seminars: it carries the badges, speeds up access control and displays your brand around every neck in the room. Thanks to sublimation, your logo, your slogan or your website are printed in colour along the full length of the strap, front and back. Choose the width and the clip, upload your artwork: the exact price of your run appears in an instant, branding included, with no quote. The free proof locks in the result before production.
- Sublimation along the full length
- Carabiner, clip or safety breakaway
- Exact price straight away, no quote
Our selection
Lanyards & neck straps: the models to customise
SET Lanyard NAUTIC Long (Ø 5 mm) avec mousqueton en forme de D de 55 mm
SET Lanyard NAUTIC Short (Ø 5 mm) avec mousqueton à doigt de 9 mm
SET Lanyard NAUTIC Long (Ø 5 mm) avec anneau Ø 32 mm
Porte-badge extensible avec clip métallique
Échantillon imprimé de Lanyard TUBE Long (Ø 7 mm)
Échantillon imprimé de Lanyard NAUTIC Short (Ø 7 mm)
Échantillon imprimé de Lanyard CORK Short (Ø 5 mm)
Échantillon imprimé de Lanyard LEATHER Short Slim (10 mm)
Échantillon imprimé de Lanyard SUBLIMATION Long II (20 mm) en polyester
Échantillon imprimé de Bracelet Lanyard SUBLIMATION Slim II (15 mm) en polyester recyclé (100 % rPET)
Échantillon imprimé de Lanyard TUBE JACQUARD Long (Ø 7 mm)
SET Lanyard TUBE Long (Ø 7 mm) avec mousqueton en forme de D de 55 mm et fermoir de sécurité Ø 7 mm
SET Lanyard TUBE Short (Ø 7 mm) avec mousqueton à doigt de 9 mm
SET Lanyard NAUTIC Longe (Ø 7 mm) avec mousqueton en forme de D de 55 mm et fermoir de sécurité Ø 7 mm
SET Lanyard NAUTIC Short (Ø 7 mm) avec mousqueton à porte de 9 mm
SET Lanyard TUBE Long (Ø 7 mm) avec anneau Ø 32 mm
Lanyards & neck straps: what to know before you order
Look at the photos from any trade show: the lanyard is everywhere. Hooked to every badge, it accompanies participants from morning to evening, crosses the aisles, goes on stage with the speakers and appears in every official photo. For an organiser, it is the item that unifies the event; for a sponsor, it is one of the most visible positions on site — literally worn by every visitor. And the use does not stop at the event: quality lanyards are reused for company badges, office keys and USB sticks. A well-printed strap can thus go on working for months after the conference that produced it, for a minimal unit cost.
Sublimation turns the lanyard into a complete strip of expression: repeated logo, alternating colours, slogan, web address, patterns — everything prints in full colour on both sides of the strap, with no relief and no cracking. In the Wegoodie configurator you compose your artwork along the real length of the lanyard, choose the width and the attachments (carabiner, badge clip, safety breakaway), and the exact price of your run appears immediately, branding included, with no quote. Our studio checks how the pattern repeats and sends you a proof of the strap laid flat: that is the Workshop Promise — you stay in control of the result. Allow 7 to 10 working days after you approve your proof: for a conference, order as soon as your artwork is ready, and think about matching badge holders for a flawless accreditation handover.
Frequently asked questions
How is a custom lanyard printed?
By sublimation: the inks are fixed into the fibres of the strap, which allows your logo, your colours and even full-colour patterns to be printed along the whole length, front and back, with no raised surface or plastic feel. The branding does not flake and stays sharp conference after conference. The proof shows you the strap laid flat before production.
What is the price of a custom lanyard?
It depends on the width of the strap, the options (carabiner, badge clip, safety breakaway) and the quantity. Upload your artwork in the configurator: the exact price of your run appears immediately, branding included, with no quote. As lanyards are often ordered in numbers for events, the volume bands quickly become attractive.
Which attachments should I choose for a badge lanyard?
The metal carabiner is the trade-show standard: sturdy, it takes badge holders and keys. The plastic clip suits light badges, and the detachable safety breakaway — which opens if pulled — is recommended in industrial settings or around machinery. Several strap widths are available: the wider it is, the more legible your logo.
Why plan custom lanyards for a trade show or conference?
Because they work all day long: every participant wears your brand at eye level, in the photos, in the aisles, during the talks. They are also a practical way to tell teams and visitors apart. Many are reused afterwards for company badges or keys — so many free exposures after the event.
What lead time and minimum quantity for custom lanyards?
Allow 7 to 10 working days after you approve your proof, delivery included — plan your event date accordingly. There is no imposed minimum: you order from 1 piece.
Another question? Read the FAQ or write to the studio.